PA18 UHF/VHF Antenna Pre-Amplifier Kit

PA18 UHF / VHF Antenna Preamplifier Kit


For TV antenna installations with weak signals in rural locations, 100 ft. or more of coaxial cable from the antenna to the TV, and/or the use of splitters, the PA18 UHF/VHF Preamplifier will ensure consistent signal performance for reliable picture quality and reception. Easy installation and easy to use. Includes the PA18 low-noise preamplifier, low-loss power inserter, two 36 in. weatherproof, high-performance coaxial cables, and a 12V DC power adapter.


  • Overview

All preamplifiers boost signal, but most also introduce noise - an undesirable signal which, when strong enough, can lead to poor or no reception. Our PA18 Preamplifier offers ample gain while maintaining low-noise figures. The result is a clean, consistent signal. The PA18 can be mast-mounted close to the antenna before the signal has weakened through the coaxial cable running between the antenna and the TV or converter box.

Helpful Tip: To determine if you need a PA18 Preamplifier, first make sure your antenna is pointed in the direction of your local broadcast towers. Connect only one TV or converter box to the antenna. Perform a channel scan using the remote control for your TV/converter box. If you are not able to receive all of your local TV stations, then there is a good chance you need a preamplifier to help boost the weak signals.

Same Day Shipping on Most Orders   |   Partners   |   Resources
© Antennas Direct,    |   16388 Westwoods Business Park, Ellisville, MO 63021   |   877-825-5572